ER316L - MIG Stainless Steel Wire - 2 Lb x 0.030" (2 SPOOLS) from SÜA

ER316L - MIG Stainless Steel Wire - 2 Lb x 0.030" (2 SPOOLS) from SÜA
ER316L - MIG Stainless Steel Wire - 2 Lb x 0.030" (2 SPOOLS) from SÜA (click images to enlarge)

ER316L - MIG Stainless Steel Wire - 2 Lb x 0.030" (2 SPOOLS) from SÜA

$29.10
In Stock Add to Cart
Usually ships in 1-2 business days
Product prices and availability are accurate as of and are subject to change. Any price and availability information displayed on at the time of purchase will apply to the purchase of this product.

Description of ER316L - MIG Stainless Steel Wire - 2 Lb x 0.030" (2...

We are delighted to present the famous ER316L - MIG Stainless Steel Wire - 2 Lb x 0.030" (2 SPOOLS).

With so many on offer these days, it is good to have a name you can trust. The ER316L - MIG Stainless Steel Wire - 2 Lb x 0.030" (2 SPOOLS) is certainly that and will be a great purchase.

For this reduced price, the ER316L - MIG Stainless Steel Wire - 2 Lb x 0.030" (2 SPOOLS) comes highly respected and is a regular choice amongst lots of people. SÜA have added some nice touches and this equals good value.

Manufacturer Description

ER316L - WIRE - MIG (GMAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: The main component of ER316L is 18Cr-12Ni-2Mo. It is an all position welding MIG Wire. The weld-ability is good. Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. It has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt corrosion because it contains Molybdenum. USES: It is widely used in petrochemical, chemical fertilizer equipment such as 022Cr17Ni12Mo2 (SUS 316L) and other materials of welding. CHEMICAL COMPOSITION (%): Chemical Composition C Mn Si Cr Ni Requirement ?0.030 1.00~2.50 0.30~0.65 18..00~20.00 11.00~14.00 Typical test result 0.023 1.90 0.42 19.12 12.59 Chemical Composition Mo P S Cu Requirement 2.00~3.00 ?0.030 ?0.030 ?0.75 Typical test result 2.59 0.009 0.008 0.28 WELDING PARAMETERS (DC+): Diameter (mm) ?0.8 ?1.0 ?1.2 Welding Current (Amps) 70~150 100~200 140~220 NOTES: 1. Shield gas: Must ensure not to operate with impurity shield Gas, Recommended Rate of mixed gas: Ar + 1-3% O2. 2. Operation flow rate of shield gas: 20-25L/min. 3. Electrode extension: 15-25mm 4. The welding should be operated in clean surface without rust, moist, oil contamination and dust. 5. To avoid bubbles protect from wind its speed reach 1.5 m/s. The above parameters are for reference purpose and depend on diverse factors. Run tests, evaluate and set your welding parameters before starting the welding job.

Product Features

High Molybdenum Stainless Steel Welding Wire The main component of ER316L is 18Cr-12Ni-2Mo USES: For corrosive enviroments, It has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt. 2 x 2 Lb Spool

Product Tags

Write a Review

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.